eSIM has no internet abroad: what to check
iPhone — troubleshoot: no internet
- Open Settings > Cellular, turn on Cellular Data, tap the travel eSIM > Cellular Data Options and make sure Data Roaming is on.
- Turn Airplane Mode on for at least 15 seconds, then off.
- Restart the iPhone.
- Check Settings > General > About for a carrier settings update and install it.
Source: Apple Support: If you see SOS, No Service, or Searching on your iPhone or iPad
iPhone — troubleshoot: no internet
- Open Settings > Cellular (or Mobile Data), select the eSIM and make sure Turn On This Line is on.
- Go back and select the eSIM as your data line.
- Tap the eSIM > Network Selection, turn Automatic off and pick the network named in the Airalo app.
- If an APN is listed in the app, enter it under the eSIM > Cellular Data Network.
- Tap the eSIM and set Data Roaming as the Airalo app instructs.
Source: Airalo Help Center: How do I access the internet using an Airalo eSIM on an iOS device?
iPhone — troubleshoot: no signal
- Open Settings > Cellular, tap the line and make sure Turn On This Line is on.
- Turn Airplane Mode on for at least 15 seconds, then off.
- Restart the iPhone.
- Check Settings > General > About for a carrier settings update.
- If the line is missing from Settings > Cellular, the eSIM is not installed; contact your provider.
Source: Apple Support: If you see SOS, No Service, or Searching on your iPhone or iPad
iPhone — troubleshoot: sos only
- SOS means the phone cannot reach a carrier network but can still make emergency calls.
- Open Settings > Cellular, tap the travel eSIM and make sure Turn On This Line is on.
- Tap the travel eSIM > Cellular Data Options and turn on Data Roaming.
- Turn Airplane Mode on for at least 15 seconds, then off, and restart.
- Ask your provider to confirm the plan is active and covers where you are.
Source: Apple Support: If you see SOS, No Service, or Searching on your iPhone or iPad
iPhone — troubleshoot: qr failed
- Connect to stable Wi-Fi and update to the latest iOS.
- Turn Airplane Mode on and off, then restart the iPhone.
- If it still fails, note the exact error and contact your provider with your EID (Settings > General > About).
Source: Apple Support: If you can't set up an eSIM on your iPhone
iPhone — troubleshoot: qr failed
- 'This code is no longer valid' usually means the eSIM is already installed or the install was interrupted.
- Check Settings > General > About for the eSIM before retrying.
- Turn off any VPN, use a stable connection, and remove old unused eSIMs.
- New Airalo: Packages > your destination > Device Options (...) > Retry device setup.
- Public Airalo: use the Direct installation in My eSIMs instead of the QR code.
- An eSIM that was fully deleted may not be reinstallable.
Source: Airalo Help Center: I'm experiencing the “This code is no longer valid” error
iPhone — troubleshoot: qr failed
- Find the manual details in the Airalo app: My eSIMs > your eSIM > Install & Share > Share and More.
- Open Settings > Cellular > Add Cellular Plan > Enter Details Manually.
- Enter the SM-DP+ Address, Activation Code and Confirmation Code (if given).
- Turn on the eSIM, select it for Cellular Data and enable Data Roaming.
- Set an APN if the installation details list one.
Source: Airalo Help Center: What to do if you can't scan your QR Code
iPhone — troubleshoot: cannot add
- Open Settings > General > About and look at Carrier Lock.
- If it does not say No SIM Restrictions, the iPhone is locked: ask your home carrier to unlock it.
- Activation needs a Wi-Fi or hotspot connection, so connect to one and try again.
Source: Apple Support: Use eSIM while traveling internationally with your iPhone
iPhone — troubleshoot: cannot add
- 'Cellular Plans From This Carrier Cannot be Added' usually means the iPhone is network-locked.
- Go to Settings > General > About and check Carrier Lock shows No SIM restrictions.
- If not, contact your carrier to unlock the device.
iPhone — troubleshoot: other
- Only one line can use cellular data at a time; the other may show No Service during data use.
- Make sure both lines are on in Settings > Cellular and both carriers show in Control Center.
- To answer calls on your home number while data is on the travel eSIM, turn on Wi-Fi Calling for the home line if your carrier supports it.
- If the problem continues, contact your carrier.
Source: Apple Support: If Dual SIM with eSIM isn't working on your iPhone
Android (Pixel) — troubleshoot: no internet
- Go to Settings > Network & internet > SIMs and confirm Mobile data is on.
- Tap the eSIM and make sure Use SIM is on.
- Turn airplane mode on and off, or power off for 30 seconds (not restart) and turn back on.
- Reset with Settings > System > Reset options > Reset mobile network settings.
Source: Pixel Phone Help: Fix mobile connectivity issues
Android (Pixel) — troubleshoot: no internet
- Open Settings > Network & internet > SIMs and pick the travel eSIM's tab.
- Turn on Mobile data.
- Turn on Roaming.
- Tap Access point names and check the APN your provider gave you.
- Tap Network and pick an operator your provider supports.
Source: Pixel Phone Help: Connect to mobile networks on a Pixel phone
Android (Pixel) — troubleshoot: no signal
- Go to Settings > Network & internet and make sure airplane mode is off.
- In Settings > Network & internet > SIMs, a greyed-out carrier with 'No SIM' means the eSIM is inactive: turn on Use SIM.
- Select your carrier and set Preferred network type (try LTE if 5G is weak).
- Turn off Battery Saver, which disables 5G.
- Reset with Settings > System > Reset options > Reset mobile network settings.
Source: Pixel Phone Help: Fix mobile connectivity issues
Android (Pixel) — troubleshoot: sos only
- In Settings > Network & internet > SIMs, check the eSIM is listed and Use SIM is on.
- Turn off Wi-Fi and check the signal indicator; move away from walls or buildings if signal is weak.
- Power off for 30 seconds, then turn on.
- Reset with Settings > System > Reset options > Reset mobile network settings.
- Contact your provider to check for outages and confirm the plan is active.
Source: Pixel Phone Help: Fix mobile connectivity issues
Android (Pixel) — troubleshoot: qr failed
- Use stable Wi-Fi and turn off any VPN.
- Instead of scanning, enter the code manually: Settings > Network & internet > + next to SIMs > Download a SIM instead? > Next > Need help? > Enter it manually.
- Paste the SM-DP+ address and activation code from the Airalo app.
Source: Airalo Help Center: How do I access the internet using an Airalo eSIM on a Google Pixel device?
Android (Pixel) — troubleshoot: cannot add
- Retry Settings > Network & internet > SIMs > Add SIM > Set up an eSIM.
- If setup keeps failing, contact your provider.
- If you didn't buy the phone from your carrier, ask them to confirm eSIM support and your IMEI/device ID.
Source: Pixel Phone Help: Set up a new eSIM
Android (Pixel) — troubleshoot: other
- Pixel 8 or earlier: calls to the other SIM go to voicemail while you are on a call.
- Pixel 8a and later: turn on Mobile data and Automatic data switching under Settings > Network & internet > SIMs to take calls on both SIMs (needs Wi-Fi calling on the second SIM).
- A 'Voice unavailable' notification means the two networks conflict: contact your carrier.
Source: Pixel Phone Help: How to use dual SIMs on your Google Pixel phone
Samsung — troubleshoot: no internet
- Make sure Mobile data is on: Settings > Connections > Data usage > Mobile data.
- Go to Settings > Connections > Mobile networks and turn on Data roaming (if greyed out, turn Mobile data on first).
- Check your provider allows roaming for your device and plan.
- Update software and restart the phone.
Samsung — troubleshoot: no internet
- Go to Settings > Connections > SIM manager and confirm the eSIM switch is on and it is selected for Mobile data.
- Go to Settings > Connections > Mobile networks > Network operators, select the eSIM, turn off Select automatically and pick the network named in the Airalo app.
- Set the APN if the app lists one, and set Data Roaming as instructed.
Source: Airalo Help Center: How do I access the internet using an Airalo eSIM on a Samsung Galaxy device?
Samsung — troubleshoot: no signal
- Go to Settings > Connections > SIM manager and check the eSIM switch is on.
- Go to Settings > Connections > Mobile networks > Network operators and pick the network your provider supports.
- Set the APN and Data Roaming as the Airalo app's How to connect section instructs.
- If it still doesn't connect, contact Airalo via chat in the app.
Source: Airalo Help Center: How do I access the internet using an Airalo eSIM on a Samsung Galaxy device?
Samsung — troubleshoot: sos only
- 'Emergency calls only' usually means weak signal or a SIM problem, including an eSIM that hasn't been activated.
- Tap Back to leave the Emergency call screen.
- Older software (before One UI 5.1): tap the three dots > Turn off emergency mode > Disable.
- Make sure the eSIM is activated, and move to a spot with better signal.
- If it continues, contact Samsung Support or your provider.
Source: Samsung US Support: Samsung phone displays Emergency calls only
Samsung — troubleshoot: qr failed
- Go to Settings > Connections > SIM card manager > Add mobile plan.
- Choose Add using activation code instead of the QR code.
- Enter the information your provider gave you.
Source: Samsung UK Support: How to use an eSIM with your Galaxy phone
Samsung — troubleshoot: cannot add
- Some carriers don't support the eSIM features of every Galaxy device; ask your provider.
- eSIM may not be supported depending on the phone's country of origin.
- If you're asked for an unlock code, contact the phone's original carrier.
Source: Samsung US Support: SIM cards for your Galaxy phone or tablet
Samsung — troubleshoot: other
- While you're on a call on one SIM, the other SIM can't receive new calls.
- Switch the SIM for one call in the Phone app by tapping the SIM icon, or in Messages by tapping the SIM icon in the chat box.
Source: Samsung UK Support: How to use dual SIM cards on your Samsung phone